Inner Inspection Of Begate Fiber Optic Patch Panel
All fiber patch panel must be inspected before shipping. The
inspection is refer to national communications industry standard
YD/T988-2007. And the purpose of inspection is to check the
integrity and completeness of the fiber patch panel. Our quality
control staff will check :
1, The fixing and protection function for fiber cable, all product
should has fixing setting and protection accessories;
2,Fiber connection and terminal function, is should have enough
space for patching, operating and storage ;
3, Fiber patching and record function, the optical fiber serial
number can be quickly and conveniently adjusted to change the route
of the transmission system by the optical fiber jumper;
4, Fiber capacity has to same as the order requirement;
5, Mechanical strength, tensile test and torsion test;
6, Box assembly, all fasteners shall be firmly and securely
connected, and the surface treatment of the fasteners shall be in
accordance with the 2 level as specified in article of the
GB/T5267-1985 standard;
7, Label and packing.
Product Features of SC Fiber Patch Panel
1, Magnetic lock button brings easy closing and opening.
2, Easy for operation and maintenance with slide-in and pull-out
system.
3, Sliding drawer design is easy for access from both front side
and rear side.
4, Glossy black powder-coated for a long-lasting and rust resistant
5, Extended depth provide more working space for splicing and cable
storage.
6, Rack mounted can be loaded with up to 3 panels (4ports or 8
ports).
7, Suitable for SC, FC, ST, LC adapter, only need to change
different plates.
8, It's suitable for ribbon or non-ribbon optical fiber cable.
9, It is with standard size, light weight and reasonable structure
Parameter of Rack Mounted Fiber Optic Enclosure
| Fiber Capacity | 12 Cores |
| Adapter Type | SC Simplex |
| Pigtail Type | SC 0.9mm 1.5m 12 colors |
| Accessories | Fiber tray, winding wheel, production sleeve, nylon ties, screw and
so on |
| Panel thickness | 1.2mm after painting |
| Environment temperature | -40℃ ~+80 ℃ |
| Relative humidity | <=85% ( under 30 ℃) |
| Atmosphere pressure | 70~106KPa |
| Insulated Resistance | >=2 x 10MΩ/500V (DC) |
| Intensity | <= 15kv(DC) /1minno spark-over and no flying arc |
Begate Fiber Patch Panel Workshop:
Similar Models:
